Serat Optik OM1
Referensi
| IEC 60794-1-1 | Kabel serat optik - Bagean 1-1: Spesifikasi umum - Umum |
| IEC60794- 1-2 IEC 60793-2-10 | Serat optik - Bagean 2-10: Spesifikasi produk - Spesifikasi bagean kanggo serat multimode kategori A1 |
| IEC 60793-1-20 | Serat optik - Bagean 1-20: Cara pangukuran lan prosedur tes - Geometri serat |
| IEC 60793- 1-21 | Serat optik - Bagean 1-21: Cara pangukuran lan prosedur tes - Geometri lapisan |
| IEC 60793- 1-22 | Serat optik - Bagean 1-22: Cara pangukuran lan prosedur tes - Pangukuran dawa |
| IEC 60793-1-30 | Serat optik - Bagean 1-30: Cara pangukuran lan prosedur tes - Tes bukti serat |
| IEC 60793-1-31 | Serat optik - Bagean 1-31: Cara pangukuran lan prosedur tes - Kekuwatan tensile |
| IEC 60793- 1-32 | Serat optik - Bagean 1-32: Cara pangukuran lan prosedur tes - Lapisan strippability |
| IEC 60793- 1-33 | Serat optik - Bagean 1-33: Cara pangukuran lan prosedur tes - Kerentanan karat stres |
| IEC 60793- 1-34 | Serat optik - Bagean 1-34: Cara pangukuran lan prosedur tes - Serat curl |
| IEC 60793-1-40 | Serat optik - Bagean 1-40: Cara pangukuran lan prosedur tes - Atenuasi |
| IEC 60793- 1-41 | Serat optik - Bagean 1-41: Cara pangukuran lan prosedur tes - Bandwidth |
| IEC 60793- 1-42 | Serat optik - Bagean 1-42: Cara pangukuran lan prosedur tes - Dispersi kromatik |
| IEC 60793- 1-43 | Serat optik - Bagean 1-43: Cara pangukuran lan prosedur tes - Bukaan angka |
| IEC 60793-1-46 | Serat optik - Bagean 1-46: Cara pangukuran lan prosedur tes - Ngawasi owah-owahan ing transmisi optik |
| IEC 60793-1-47 | Serat optik - Bagean 1-47: Cara pangukuran lan prosedur tes - Mundhut makrobending |
| IEC 60793-1-49 | Serat optik - Bagean 1-49: Cara pangukuran lan prosedur tes - Tundha mode diferensial |
| IEC 60793-1-50 | Serat optik - Bagean 1-50: Cara pangukuran lan prosedur tes - Panas lembab (kahanan ajeg) |
| IEC 60793-1-51 | Serat optik - Bagean 1-51: Cara pangukuran lan prosedur tes - Panas garing |
| IEC 60793- 1-52 | Serat optik - Bagean 1-52: Cara pangukuran lan prosedur tes - Owah-owahan suhu |
| IEC 60793- 1-53 | Serat optik - Bagean 1-53: Cara pangukuran lan prosedur tes Kecemplung banyu |
Pambuka produk
Skenario Aplikasi
Fitur kinerja
Spesifikasi Produk
Parameter | kahanan | Unit | Nilai |
Optik (A/B Grade) | |||
Atenuasi | 850 nm | dB/km | ≤2.8/≤3.0 |
1300 nm | dB/km | ≤0.7/≤1.0 | |
| Bandwidth (Overfilled Bukak) | 850 nm | MHz.km | ≥200/≥160 |
1300 nm | MHz.km | ≥500/≥200 | |
Aperture Numerik |
|
| 0,275±0,015 |
Indeks bias Kelompok Efektif | 850 nm |
| 1.496 |
1300 nm |
| 1.491 | |
Atenuasi Nonuniformity | 1300 nm | dB/km | ≤0.10 |
Discontinuity parsial | 1300 nm | dB | ≤0.10 |
Geometris | |||
Diameter inti |
| μm | 62.5±2.5 |
Non-Circularity inti |
| % | ≤5.0 |
Diameter Cladding |
| μm | 125±1.0 |
Cladding Non-Circularity |
| % | ≤1.0 |
Kesalahan Konsentrisitas Inti/Cladding |
| μm | ≤1.5 |
Diameter Coating (Ora Diwarnai) |
| μm | 242±7 |
| Coating / Cladding Kesalahan Konsentris |
| μm | ≤12.0 |
Lingkungan (850nm, 1300nm) | |||
Suhu Cycling | -60 ℃ iki+85 ℃ | dB/km | ≤0.10 |
Suhu Kelembapan Cycling | -10 ℃ nganti + 85 ℃ nganti 98% RH |
dB/km |
≤0.10 |
Suhu Dhuwur & Kelembapan Dhuwur | 85 ℃ ing 85% RH | dB/km | ≤0.10 |
Kecemplung banyu | 23 ℃ | dB/km | ≤0.10 |
Tuwa Suhu Dhuwur | 85 ℃ | dB/km | ≤0.10 |
Mekanik | |||
Bukti Stress |
| % | 1.0 |
| kpsi | 100 | |
Coating Strip Force | Puncak | N | 1.3-8.9 |
Rata-rata | N | 1.5 | |
Kelelahan Dinamis (Nd) | Nilai Khas |
| ≥20 |
Mundhut Macrobend | |||
R37,5 mm × 100 t | 850 nm 1300 nm | dB dB | ≤0.5 ≤0.5 |
Dawane Pangiriman | |||
Panjang Reel Standar |
| km | 1.1- 17.6 |
Tes serat optik
Sajrone periode manufaktur, kabeh serat optik kudu diuji miturut metode tes ing ngisor iki.
Item | Metode tes |
Karakteristik optik | |
Atenuasi | IEC 60793- 1-40 |
Dispersi kromatik | IEC60793- 1-42 |
Ganti transmisi optik | IEC60793- 1-46 |
Tundha mode diferensial | IEC60793- 1-49 |
Mlengkung mundhut | IEC 60793-1-47 |
Modal bandwidth | IEC60793- 1-41 |
Aperture angka | IEC60793- 1-43 |
Karakteristik geometris | |
diameteripun inti | IEC 60793-1-20 |
Diameter cladding | |
diameteripun lapisan | |
Cladding non-circularity | |
kesalahan concentricity inti / cladding | |
Cladding / lapisan concentricity kesalahan | |
Karakteristik mekanik | |
Tes bukti | IEC 60793-1-30 |
Serat nggulung | IEC 60793- 1-34 |
Coating Strip gaya | IEC 60793- 1-32 |
Karakteristik lingkungan | |
Atenuasi sing disebabake suhu | IEC 60793- 1-52 |
Atenuasi sing disebabake panas garing | IEC 60793-1-51 |
Water immersion induced attenuation | IEC 60793- 1-53 |
Atenuasi sing disebabake panas lembab | IEC 60793-1-50 |